How To Transform Platina Into CDI / TCI

Automobile electronic ignition system (Ignition TCI = Transitorized control) that are well known in the indo with a CDI system is different though, but that's common in the know ha ha. Actually, to upgrade from platinum to the CDI you can do yourself without having to utilize the help of the workshop.

As CDI car in the picture above, the CDI is a finished product and we find in many auto parts store with affordable prices and the installation of a practical and fast. With a single cable that utilizes Minus Coil voltage as to mendriver coil to generate high voltage in accordance with the received input signal CDI. In CDI this car uses hall effect sensor which is very sensitive and stable output at all engine RPM point.

The easy way to upgrade / install CDI namely:

1. Top right cylinder engine 1.
2. Make sure the direction of the rotor leads to the No. 1 spark plug wires.
3. Remove the platinum from the stand.
4. Connect the CDI module.
5. Put Reluctor CDI (make sure not funny). (Position the sign in accordance with the instructions)
6. Measure the gap / distance and reluctor module, adjust the provisions of the maker.
7. CDI cable installation and loose platinum condenser.
8. Complete the distributor and the engine starter preparation.
9. Start the engine and check ignition when using a timing light. (When the ignition timing adjusted to the type of vehicle).
10. Finishing.